Gilderflukeco BR-MultiBrick32 Manual do Utilizador descarregar pdf (Página 13)

BR-MultiBrick32 Connections

RS-422 Serial Port (Revision 1.nn Cards Only): This is used to config-

ure the BR-MultiBrick32. It is compatible with all of the RS-422 Seri-

al Ports used on Gilderfluke & Company products.

As a convenience, the four active lines on this connector are

bussed to the backplane of the card cage. This allows you to

communicate to a whole card cage full of BR-MultiBrick32, BS-

ANAs, 'Smart' Brick Brains, Electronic FeedBack (EFB) 'Smart' Bricks

and other cards through the connector on any single card. They

just need to be set to different addresses. If desired, permanent

connections can be made on the back of a card cage.

Revision 2.00 and later BR-MultiBrick32 cards have only the

backplane serial port connections.

The serial data signals from the 1.nn revision BR-MultiBrick32s

are brought out on a six position RJ-12 (six position, six conductor

modular telephone style connector). Facing the end of the cable

with the release latch upwards, its pin out is as follows:

COLOR SIGNAL NAME:

LEFT #1 white Signal Ground

#2 black - Serial data out from card

#3 red + Serial data out from card

#4 green - Serial data in to card

#5 yellow + Serial data in to card

RIGHT #6 blue Signal Ground

PC and Compatible Connections: If you are only talking to a

single BR-MultiBrick32 and your wire length is short, you may be

able to simply cross wire the RS-232 serial port on your PC to talk

to the BR-MultiBrick32. This does not work on all PCs, as some

don’t swing their RS-232 outputs as far as they should. If it does

not work with your PC, you may need to get a RS-232 to RS-422

converter (like our 232conv-09) to talk to the BR-MultiBrick32. To

cross wire the RS-422 / RS-485 signals from the BR-MultiBrick32 to

the RS-232 serial port of an IBM compatible, cross connect the

signals as follows:

DB-25 DE-9 Signal Signal from/to BR-MultiBrick32

2 3 DATA OUT - Serial data into card (#4 green)

3 2 DATA IN - Serial data out from card (#2 black)

7 5 GROUND Signal Ground (#1 white or #6 blue)

Apple Macintosh Connections: Apple Macintosh computers

GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX 818/840-9485

AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX 407/354-5955

7 of 36

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Sem comentários

Gilderflukeco BR-MultiBrick32 Manual do Utilizador Página 13