Gilderflukeco BR-MultiBrick32 Manual do Utilizador descarregar pdf (Página 11)

a) When operating as a 'Smart' Brick: This LED will display the

'Smart' Brick Brain’s heartbeat. This is transmitted from the 'S-

mart' Brick Brain through the 'Smart' Brick Network that inter-

connects all of the 'Smart' Bricks. If this LED is not flashing,

then you need to check your 'Smart' Brick Network connec-

tions or your 'Smart' Brick Brain.

b) When operating as a 'Dumb' Brick: This LED will be ON

whenever a show is running. It will be off when no shows are

running. This output is also sent out the ‘Yellow’ status output

on the ‘J8’ connection on the backplane.

c) When receiving data download for permanent storage in

Flash memory (Revision 1.nn Cards Only): This LED will

flash to show that data is being received.

3) DMX-512: This LED will light to show you that the BR-MultiBrick32 is

receiving realtime updates through either the DMX-512 or RS-422

serial ports.

4) Board Error: This LED will flash to show you that the BR-MultiBrick32

has sensed one of the following errors:

a) Just booted: Lights for a short period each time the BR-

MultiBrick32’s microcontroller starts up.

b) 'Smart' Brick Network Error: Flashes if an error is received

in a 'Smart' Brick Network packet from the 'Smart' Brick Brain.

c) Realtime DMX-512 Update Error: The optional checksum in

the DMX-512 realtime update didn’t agree with the data re-

ceived.

d) Realtime Serial Update Error: The checksum in the RS-422

serial port realtime update didn’t agree with the data re-

ceived.

e) Download Error: There was an error in the data being

downloaded to the BR-MultiBrick32.

f) Download Timeout: If the data being downloaded to the

BR-MultiBrick32 stops mid-stream, this LED will flash as the BR-

MultiBrick32 returns itself to normal operating mode.

g) Data Verification Failure: If you ask the BR-MultiBrick32 to

verify the data in its flash memory, and it finds an error, it

will flash this LED as well as displaying an error message on

your computer screen.

h) Memory locked: If you try to clear the flash memory or

GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX 818/840-9485

AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX 407/354-5955

5 of 36

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Sem comentários

Gilderflukeco BR-MultiBrick32 Manual do Utilizador Página 11