Gilderflukeco old MACs 8 bit Digital Audio System Manual do Utilizador descarregar pdf (Página 100)

Sample Name:

Hitting the left and right keys will cycle you through all of the samples in the currently selected

file. Hitting <RETURN> or the first character of the command will bring up a pick list for all of

the samples in the current file. You can select one using the up and down arrow keys, and

then hitting <RETURN> or <SPACE> when you are satisfied.

The 'New' selection is used to create a new sample. It prompts you to enter a new name or

modify the existing one (The modified name will be the name of a new sample. Use the

RENAME SAMPLE command if you just want to change a sample's name.). Hit <RETURN> when

you are done. New samples default to the settings of the last sample which had been

selected.

Record Sample:

This command is used to sample in the audio data. Recording can be stopped at any time by

hitting any key on the keyboard (although this leaves the old sample with as much of the new

audio as you let in at its front). The audio you are sampling is fed through as you sample it so

you can hear what is going on. Monophonic samples use only the Right channel.

If the THRESHOLD has been set, the DAS-100 waits for the input on the right channel to exceed

the threshold before it starts recording data (the left channel is ignored). If you have made the

sample length longer for an existing sample, then the DAS-100 will prompt you and then

spend a little time making room for this new sample length.

Clipping makes a rather unpleasant noise in digital audio systems. For this reason it is

important to adjust the levels for the sample before it is taken. If you can't watch for clips while

taking the sample, don't worry, you can see them on the playback too.

Playback:

This command plays back the currently selected sample. Playback can be stopped at any

time by hitting any key on the keyboard. MONOPHONIC samples come out only on the RIGHT

channel. The clip indicators will repeat any clips which were found when the audio was

sampled. If the LOOPING MODE is ON, then the sample will repeat until you tell it to stop (by

hitting any key).

Configuration Menu:

This gets you to the CONFIGURATION MENU.

Evaluate Data Menu:

This gets you to the DATA EVALUATION MENU.

Dump Data:

This gets you to the DATA DUMP MENU.

EPROM Image Menu:

This gets you to the EPROM IMAGE MENU.

Print Reports:

This gets you to the LABEL PRINTING MENU.

Quit:

This gets you back to DOS.

GILDERFLUKE & C

. ¥ 205 SOUTH FLOWER ST. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 109 110

Sem comentários

Gilderflukeco old MACs 8 bit Digital Audio System Manual do Utilizador Página 100